Automated production line is currently the first choice for factory enterprises to carry out automation transformation, but the construction of automated production line is very complicated, involving many professional technologies and core configurations. What are the core configurations of the composition of automated production lines?

1. Controller-the brain of automation

The controller of the automated production line is composed of a program counter, an instruction register, an instruction decoder, a timing generator, and an operation controller. It is a "decision-making mechanism" that issues operation commands to the equipment by changing the main circuit or control circuit Wiring and changing the resistance value in the circuit to control the starting, speed regulation, braking and reverse master device of the motor, so as to complete coordination and

Direct the operation of the entire production line!

2. Robotic hand-the executor of automation

When the controller issues an operation instruction, a robot hand is required to automatically perform the work. It is generally composed of an operating mechanism, a driving device, a detection device, a control system, and complex machinery. It can run pre-arranged programs. , It can also act according to the principles and programs formulated with artificial intelligence technology. Instead of manually performing various reproducible and high-precision operations!

3. Servo motor-the power of automation

Servo motor refers to the engine that controls the operation of mechanical components in the servo system. It is an auxiliary motor indirect speed change device, which can control the speed and position accuracy very accurately. In the automatic control system, it is used as an actuator, and has the characteristics of small electromechanical time constant, high linearity, starting voltage, etc., which can convert the received electrical signal into the angular displacement or the motor shaft

Angular velocity output!

4. Sensor-automated touch

Sensors are the primary link to realize automatic detection and automatic control. In modern industrial production, especially in the automated production process, various sensors are used to monitor and control various parameters in the production process to make the equipment work in a normal state or at the most In good condition, and make the product reach the best quality!

5. Industrial cameras-the eyes of automation

Industrial cameras are a key component of the machine vision system. They are generally installed on the machine assembly line to replace the human eye for measurement and judgment. The digital image capture target is converted into an image signal and sent to a dedicated image processing system. The imaging system performs various operations on these signals to extract the characteristics of the target, and then controls the actions of the equipment on the spot according to the results of the discrimination!

6. Instruments and meters--automatic adjustment

The instruments and meters of the automated production line are appliances or equipment used to detect, measure, observe, and calculate various physical quantities, material components, and physical parameters. Various instruments and meters need to be used during the operation and use of automated production lines, such as measuring pressure, liquid level, flow, temperature and other parameter values ​​required for the control process, and relevant instruments and meters are needed!